Options & Addons

• Reduces the probability of airborne disease transmission
• 18W UVGI light source that produces broadband 250-260nm UV-C without ozone production
• 5W of UVGI for a single pass kill efficiency of 85%
• UVGI radiation disrupts genetic material in microorganisms, providing an additional layer of protection to the health of your home to efficiently destroy microbes in the air
• UV Bulbs should be replaced after 8000 hours of operation
• Installs internally in the CERV2 (factory installed in new CERV2 orders)

• Measure Outdoor VOC concentration
• Prevent VOC based ventilation when outdoor VOCs are high
• Great for areas with wildfires or high outdoor pollutant events

• Note: The CERV comes standard with WiFi. The Ethernet module can be used to replace the WiFi connection with a hardwired internet connection.
• Simple setup - just connect the Ethernet Module to your router with standard cat5/5e/6 ethernet cable.

• Significantly reduces fan/duct noise
• Recommended for CERV suppy outlet.  8" Duct attaches directly to CERV.
• Easy installation.
• Great for large homes with extensive ductwork requiring high airflow

• Removes lint, household dust, pollen, smoke particles, dust mites, pet dander, smog, virus carriers, mold spores, help eliminate unwanted odors and other contaminants.
• Activated charcoal flat panel added to increase odor and smoke control
• Ideal for customers looking for superior filtration but needing an odor control element
• Great for locations with frequent wildfires or neighbors with wood burning furnaces
• Filters should be changed as needed (maximum 90 days)
• Standard 1" thickness or 2" extended life filters available
• Made in the USA

Attracts and captures most odors, VOCs and airborne particles from your indoor air.

• Three times the carbon media for better odor absorption.
• Ideal for residential customers in apartments, or for industrial customers who may need a pre-filter to help with strong smells.
• Filters should be changed approximately every 90 days.
• Made in the USA.
• Filter should be stacked on top of the CERV's existing MERV 13 filter for optimal performance.

• Removes lint, household dust, pollen, smoke particles, dust mites, pet dander, smog, virus carriers, mold spores, help eliminate unwanted odors and other contaminants.
• Colorfil™ filter coating technology removes amines, acidic gases, and aldehyde from the air better than carbon filters
• Ideal for customers looking for superior filtration but needing an odor control element
• Colorfil™ filters change color from purple to yellow, so you know exactly when to change them
• Colorfil™ amine-removal coatings are capable of removing compounds such as household chemicals, urine, pet, food, and other amine related odors from air. They do this with better efficiency than carbon filters and have 5x more capacity.
• Colorfil’s™ acid-removal coating is designed to remove acidic and acid-forming gases (e.g. SO2) from ambient air. Capacity for these compounds is 9x more than traditional carbon.
• Made in the USA

• Removes lint, household dust, pollen, smoke particles, dust mites, pet dander, virus carriers, mold spores, smog and other contaminants
• Ideal for customers with serious allergies or are concerned about particulates
• Hypoallergenic, antimicrobial, and electrostatic filter material
• Filters should be changed as needed (maximum 90 days)
• Standard 1" thickness or 2" extended life filters available
• Made in the USA

• Removes lint, household dust, pollen, smoke particles, dust mites, pet dander, smog, virus carriers, mold spores, help eliminate unwanted odors and other contaminants.
• Activated charcoal flat panel added to increase odor and smoke control
• Ideal for customers looking for superior filtration but needing an odor control element
• Great for locations with frequent wildfires or neighbors with wood burning furnaces
• Filters should be changed as needed (maximum 90 days)
• Standard 1" thickness or 2" extended life filters available
• Made in the USA

• Remote Switches trigger timed fresh air ventilation
• Individually configurable for CFM, zone, and length
• Ideal for Bathroom & Kitchen Venting
• Available in many colors
• Range: 80ft indoors, 330ft line of sight

• Monitors circuit for activity, transmits status
• Triggers Vent, Heat, Cool, etc. like auxiliary input
• Individually configurable for CFM, zone, and length
• Range: 80ft indoors, 330ft line of sight

• On/Off control like auxiliary output
• Can be used for Geo-Boost, duct heater, etc.
• 24VAC or 120-277VAC options available
• Range: 80ft indoors, 330ft line of sight

• Temperature & RH, T & RH & CO2 options available
• Remote measurement for bedrooms & bathrooms
• RH can trigger bathroom ventilation
• CO2 can trigger ventilation
• Solar powered, no batteries required!
• Range: 80ft indoors, 330ft line of sight

• Transmits signal when room is occupied
• Can trigger Vent, Heat, Cool, etc. like auxiliary input
• Great for triggering ventilation in bathrooms
• Solar powered, battery free!
• Individually configurable for CFM, zone, and length
• Range: 80ft indoors, 330ft line of sight

• Transmits signal when window or door is opened/closed
• Can be used to turn CERV off when windows open
• Range: 80ft indoors, 330ft line of sight
• Solar powered, battery free!

• Control any system with a standard thermostat interface
• Great for heat pump ducted inline with CERV (Magic-Box Concept)
• Thermostat Terminals: C, R, G, W1, W2, Y1, Y2, G1, G2, G3
• Includes temperature sensor for unit ducted in-line with CERV

• 4 Channel SPDT (Normally Open / Common / Normally Closed) Relays
• 250VAC, 2A maximum per relay
• Control Zone Dampers, Geo-Boost, duct heater, etc.

• Remotely monitor and control the CERV in your home (separate from the CERV's built in WiFi Connection)
• Powered by standard 120V outlet
• Great for CERV installations where its built-in touchscreen is difficult to access
• Included base for wall-mounting

• Extends range for Switches, ACT, Relay, Sensors, etc
• Plugs into standard 120VAC wall outlet
• Range: 80ft indoors, 330ft line of sight

• Pre-heating and pre-cooling for the CERV
• Boosts capacity and efficiency
• Smart algorithms activate when beneficial
• One filter included, pump not included
• Merv 7 pleated air filter captures large airborne particles like household dust, mold spores, and pollen.

• Optimize your home's air delivery system
• Targeted pollutant removal from areas
• Pairs well with wireless ventilation switches
• Supply fresh air to areas with greatest need
• Includes duct section and motorized damper
• *May require I/O Expansion Board

• Adds 6 dry contact/24VAC outputs
• Adds 3 dry contact/24VAC sense inputs
• Control external heating cooling, ventilation, moisture control, Geo-Boost, & more!
• Simple installation & configuration

• Best for backup heat in climates with low loads
• 1kW, 2.5kW, and 5kW versions available
• Installs easily with standard ductwork